Removal of copper (II) from aqueous solutions by adsorption onto granular activated carbon in the presence of competitor ions

Document Type : Research Paper

Authors

Department of chemical engineering, Mahshahr branch, Islamic azad university, Mahshahr, Iran

Abstract

In this work, the removal of copper from an aqueous solution by granular activated carbon (GAC) in the presence of competitor ions was studied. A batch adsorption was carried out and different parameters such as pH, contact time, initial copper concentration and competitor ions concentration were changed to determine the optimum conditions for adsorption. The optimum pH required for maximum adsorption was found to be 4.5 for copper. Equilibrium was evaluated at 144 h at room temperature. The removal efficiency of Cu(II) was 71.12% at this time. The kinetics of copper adsorption on activated carbon followed the pseudo second-order model. The experimental equilibrium sorption data were tested using the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich (D-R) equations and the Langmuir model was found to be well fitted for copper adsorption onto GAC. The maximum adsorption capacity of the adsorbent for Cu(II) was calculated from the Langmuir isotherm and found to be 7.03 mg/g. Subsequently, the removal of copper by granular activated carbon in the presence of Ag1+ and Mn2+ as competitor ions was investigated. The removal efficiency of Cu(II) ions without the presence of the competitor ions was 46% at 6 h, while the removal efficiency of Cu(II) ions in the presence of competitor ions, Ag1+ and Mn2+ , was 34.76% and 31.73%, respectively.

Keywords

Main Subjects


[1] Butter, T. J., Evison, L. M., Hancock, I. C., Holland, F. S., Matis, K. A., Philipson, A., Zouboulis, A. I. (1998). The removal and recovery of cadmium from dilute aqueous solutions by biosorption and electrolysis at laboratory scale. Water research, 32(2), 400-406.
[2] Jiang, T., Liu, W., Mao, Y., Zhang, L., Cheng, J., Gong, M., Zhao, Q. (2015). Adsorption behavior of copper ions from aqueous solution onto graphene oxide–CdS composite. Chemical engineering journal, 259, 603-610.
[3] Kobya, M., Demirbas, E., Senturk, E., Ince, M. (2005). Adsorption of heavy metal ions from aqueous solutions by activated carbon prepared from apricot stone. Bioresource technology, 96(13), 1518-1521.
[4] Nadaroglu, H., Kalkan, E., Demir, N. (2010). Removal of copper from aqueous solution using red mud. Desalination, 251(1), 90-95.
[5] Li, Q., Zhai, J., Zhang, W., Wang, M., Zhou, J. (2007). Kinetic studies of adsorption of Pb (II), Cr (III) and Cu (II) from aqueous solution by sawdust and modified peanut husk. Journal of hazardous materials, 141(1), 163-167.
[6] Amarasinghe, B. M. W. P. K., Williams, R. A. (2007). Tea waste as a low cost adsorbent for the removal of Cu and Pb from wastewater. Chemical engineering journal, 132(1), 299-309.
[7] Sarioglu, M., Atay, Ü. A., Cebeci, Y. (2005). Removal of copper from aqueous solutions by phosphate rock. Desalination, 181(1), 303-311.
[8] Hou, J., Wen, Z., Jiang, Z., Qiao, X. (2014). Study on combustion and emissions of a turbocharged compression ignition engine fueled with dimethyl ether and biodiesel blends. Journal of the energy institute, 87(2), 102-113.
[9] Ahmaruzzaman, M. (2011). Industrial wastes as low-cost potential adsorbents for the treatment of wastewater laden with heavy metals. Advances in colloid and interface science, 166(1), 36-59.
[10] Runtti, H., Tuomikoski, S., Kangas, T., Lassi, U., Kuokkanen, T., Rämö, J. (2014). Chemically activated carbon residue from biomass gasification as a sorbent for iron (II), copper (II) and nickel (II) ions. Journal of water process engineering, 4, 12-24.
[11] Godino-Salido, M. L., Santiago-Medina, A., Arranz-Mascarós, P., López-Garzón, R., Gutiérrez-Valero, M. D., Melguizo, M., López-Garzón, F. J. (2014). Novel active carbon/crown ether derivative hybrid material for the selective removal of Cu (II) ions: The crucial role of the surface chemical functions. Chemical engineering science, 114, 94-104.
[12] Larous, S., Meniai, A. H. (2012). Removal of copper (II) from aqueous solution by agricultural by-products-sawdust. Energy procedia, 18, 915-923.
[13] Hu, X. J., Liu, Y. G., Wang, H., Chen, A. W., Zeng, G. M., Liu, S. M., Zhou, L. (2013). Removal of Cu (II) ions from aqueous solution using sulfonated magnetic graphene oxide composite. Separation and purification technology, 108, 189-195.
[14] Zacaroni, L. M., Magriotis, Z. M., das Graças Cardoso, M., Santiago, W. D., Mendonça, J. G., Vieira, S. S., Nelson, D. L. (2015). Natural clay and commercial activated charcoal: Properties and application for the removal of copper from cachaça. Food control, 47, 536-544.
[15] Wen, Y., Ma, J., Chen, J., Shen, C., Li, H., Liu, W. (2015). Carbonaceous sulfur-containing chitosan–Fe (III): a novel adsorbent for efficient removal of copper (II) from water. Chemical engineering journal, 259, 372-380.
[16] Kalavathy, M. H., Karthikeyan, T., Rajgopal, S., Miranda, L. R. (2005). Kinetic and isotherm studies of Cu (II) adsorption onto H3PO4-activated rubber wood sawdust. Journal of colloid and interface science, 292(2), 354-362.
[17] Cho, H., Oh, D., Kim, K. (2005). A study on removal characteristics of heavy metals from aqueous solution by fly ash. Journal of hazardous materials, 127(1), 187-195.
[18] SenthilKumar, P., Ramalingam, S., Sathyaselvabala, V., Kirupha, S. D., Sivanesan, S. (2011). Removal of copper (II) ions from aqueous solution by adsorption using cashew nut shell. Desalination, 266(1), 63-71.
[19] Ajmal, M., Khan, A. H., Ahmad, S., Ahmad, A. (1998). Role of sawdust in the removal of copper (II) from industrial wastes. Water research, 32(10), 3085-3091.
[20] Benaissa, H., Elouchdi, M. A. (2007). Removal of copper ions from aqueous solutions by dried sunflower leaves. Chemical engineering and processing: Process intensification, 46(7), 614-622.
[21] Igberase, E., Osifo, P., Ofomaja, A. (2014). The adsorption of copper (II) ions by polyaniline graft chitosan beads from aqueous solution: equilibrium, kinetic and desorption studies. Journal of environmental chemical engineering, 2(1), 362-369.[22] Zhou, Y. T., Nie, H. L., Branford-White, C., He, Z. Y., Zhu, L. M. (2009). Removal of Cu2+ from aqueous solution by chitosan-coated magnetic nanoparticles modified with α-ketoglutaric acid. Journal of colloid and interface science, 330(1), 29-37.
[23] Wen, Y., Ma, J., Chen, J., Shen, C., Li, H., Liu, W. (2015). Carbonaceous sulfur-containing chitosan–Fe (III): a novel adsorbent for efficient removal of copper (II) from water. Chemical engineering journal, 259, 372-380.
[24] Machida, M., Yamazaki, R., Aikawa, M., Tatsumoto, H. (2005). Role of minerals in carbonaceous adsorbents for removal of Pb (II) ions from aqueous solution. Separation and purification technology, 46(1), 88-94.
[25] Salam, M. A., Al-Zhrani, G., Kosa, S. A. (2012). Simultaneous removal of copper (II), lead (II), zinc (II) and cadmium (II) from aqueous solutions by multi-walled carbon nanotubes. Comptes rendus chimie, 15(5), 398-408.
[26] Mi, X., Huang, G., Xie, W., Wang, W., Liu, Y., Gao, J. (2012). Preparation of graphene oxide aerogel and its adsorption for Cu2+ ions. Carbon, 50(13), 4856-4864.
[27] Olgun, A., Atar, N. (2011). Removal of copper and cobalt from aqueous solution onto waste containing boron impurity. Chemical engineering journal, 167(1), 140-147.
[28] Moussavi, G., Alahabadi, A., Yaghmaeian, K., Eskandari, M. (2013). Preparation, characterization and adsorption potential of the NH 4 Cl-induced activated carbon for the removal of amoxicillin antibiotic from water. Chemical engineering journal, 217, 119-128.
[29] Kim, J. W., Sohn, M. H., Kim, D. S., Sohn, S. M., Kwon, Y. S. (2001). Production of granular activated carbon from waste walnut shell and its adsorption characteristics for Cu2+ ion. Journal of hazardous materials,85(3), 301-315.
[30] Kurniawan, T. A., Chan, G. Y., Lo, W. H., Babel, S. (2006). Comparisons of low-cost adsorbents for treating wastewaters laden with heavy metals. Science of the total environment, 366(2), 409-426.
[31] Rao, M. M., Reddy, D. K., Venkateswarlu, P., Seshaiah, K. (2009). Removal of mercury from aqueous solutions using activated carbon prepared from agricultural by product/waste. Journal of environmental management, 90(1), 634-643.
[32] Ayyappan, R., Sophia, A. C., Swaminathan, K., Sandhya, S. (2005). Removal of Pb (II) from aqueous solution using carbon derived from agricultural wastes. Process biochemistry, 40(3), 1293-1299.
[33] Rao, M. M., Ramesh, A., Rao, G. P. C., Seshaiah, K. (2006). Removal of copper and cadmium from the aqueous solutions by activated carbon derived from Ceiba pentandra hulls. Journal of hazardous materials, 129(1), 123-129.
[34] Hasar, H. (2003). Adsorption of nickel (II) from aqueous solution onto activated carbon prepared from almond husk. Journal of hazardous materials, 97(1), 49-57.
[35] Ramos, R. L., Jacome, L. B., Barron, J. M., Rubio, L. F., Coronado, R. G. (2002). Adsorption of zinc (II) from an aqueous solution onto activated carbon. Journal of hazardous materials, 90(1), 27-38.
[36] Selvi, K., Pattabhi, S., Kadirvelu, K. (2001). Removal of Cr (VI) from aqueous solution by adsorption onto activated carbon. Bioresource technology, 80(1), 87-89.
[37] Omri, A., Benzina, M. (2012). Removal of manganese (II) ions from aqueous solutions by adsorption on activated carbon derived a new precursor: Ziziphus spina-christi seeds. Alexandria engineering journal, 51(4), 343-350.
[38] Budinova, T., Savova, D., Tsyntsarski, B., Ania, C. O., Cabal, B., Parra, J. B., Petrov, N. (2009). Biomass waste-derived activated carbon for the removal of arsenic and manganese ions from aqueous solutions. Applied surface science, 255(8), 4650-4657.
[39] Yang, T., Lua, A. C. (2006). Textural and chemical properties of zinc chloride activated carbons prepared from pistachio-nut shells. Materials chemistry and physics, 100(2), 438-444.
[40] Imamoglu, M., Tekir, O. (2008). Removal of copper (II) and lead (II) ions from aqueous solutions by adsorption on activated carbon from a new precursor hazelnut husks. Desalination, 228(1), 108-113.
[41] Wu, F. C., Tseng, R. L., Juang, R. S. (2001). Kinetic modeling of liquid-phase adsorption of reactive dyes and metal ions on chitosan. Water research, 35(3), 613-618.
[42] Han, R., Zhang, J., Zou, W., Shi, J., Liu, H. (2005). Equilibrium biosorption isotherm for lead ion on chaff. Journal of hazardous materials, 125(1), 266-271.
[43] Wu, Q., Chen, J., Clark, M., Yu, Y. (2014). Adsorption of copper to different biogenic oyster shell structures. Applied surface science, 311, 264-272.
[44] Ghassabzadeh, H., Mohadespour, A., Torab-Mostaedi, M., Zaheri, P., Maragheh, M. G., Taheri, H. (2010). Adsorption of Ag, Cu and Hg from aqueous solutions using expanded perlite. Journal of hazardous materials, 177(1), 950-955.
[45] Hamdaoui, O., Naffrechoux, E. (2007). Modeling of adsorption isotherms of phenol and chlorophenols onto granular activated carbon: Part I. Two-parameter models and equations allowing determination of thermodynamic parameters. Journal of hazardous materials, 147(1), 381-394.
[46] Dang, V. B. H., Doan, H. D., Dang-Vu, T., Lohi, A. (2009). Equilibrium and kinetics of biosorption of cadmium (II) and copper (II) ions by wheat straw. Bioresource technology, 100(1), 211-219.