Modeling of esterification in a batch reactor coupled with pervaporation for production of ethyl acetate catalyzed by ion- exchange resins

Document Type : Research Paper

Authors

1 Department of Chemical Engineering, Quchan University of Advanced Technology, Quchan, Iran

2 Department of Chemical Engineering, Quchan University of Advanced Technologies, Quchan, Iran

Abstract

In the chemical industry, process intensification is needed to meet important goals such as sustainable and eco-friendly processes. For esterification reaction the “produce more with less pollution” objective can be achieved by coupling reaction and separation in a so called integrated process. In this work a model for describing the esterification reaction of ethyl acetate in pervaporation membrane reactor using amberlyst 15 as a heterogeneous catalyst and polydimethylsiloxane (PDMS) membrane, was developed. This earth-friendly method with low pollution and high yield is an alternative to hazardous methods because using pervaporation membrane reactor reduces both waste and energy consumption. The validity of the model was tested by comparing the calculated results with experimental data reported in the literature. It was shown rate of conversion increased by removing ethyl acetate from the reaction mixture. A parametric study was carried out to evaluate the effects of operating conditions on the performance of the pervaporation membrane reactor. Conversion increased by increasing the temperature, molar ratios of reactants and catalyst concentration.

Keywords

Main Subjects


[1] Lipnizki, F., Field, R. W., Ten, P. K. (1999). Pervaporation-based hybrid process: a review of process design, applications and economics. Journal of membrane science153(2), 183-210.
[2] Lipnizki, F., Field, R. W. (2001). Pervaporation-based hybrid processes in treating phenolic wastewater: technical aspects and cost engineering. Separation science and technology36(15), 3311-3335.
[3] Datta, R., Tsai, S. P. (1998). Esterification of fermentation-derived acids via pervaporation (No. US 5723639). Argonne national laboratory (ANL), Argonne, iL.
[4] Dutta, B. K., Sikdar, S. K. (1991). Separation of azeotropic organic liquid mixtures by pervaporation. AIChE journal, 37 (4), 581-588.
[5] Waldburger, R. M., Widmer, F. (1996). Membrane reactors in chemical production processes and the application to the pervaporation‐assisted esterification. Chemical engineering technology19(2), 117-126.
[6] Li, X., Wang, L. J. (2001). The esterification of acetic acid with n-butanol for the production of n-butyl acetate, Membrane science, 186, 19–24.
[7] David, M. O., Nguyen, T. Q., Neel, J. (1991). Pervaporation-esterification coupling. II: Modelling of the influence of different operating parameters. Chemical engineering research & design69(A4), 341-346.
[8] Feng, X., & Huang, R. Y. (1996). Studies of a membrane reactor: esterification facilitated by pervaporation. Chemical engineering science, 51(20), 4673-4679.
[9] Hasanoğlu, A., Salt, Y., Keleşer, S., Dinçer, S. (2009). The esterification of acetic acid with ethanol in a pervaporation membrane reactor. Desalination, 245(1), 662-669.
[10] Hasanoğlu, A., Dinçer, S. (2011). Modelling of a pervaporation membrane reactor during esterification reaction coupled with separation to produce ethyl acetate. Desalination and water treatment, 35(1-3), 286-294.
[11] Yixin, Q., Shaojun, P. E. N. G., Shui, W., Zhang, Z., & Jidong, W. A. N. G. (2009). Kinetic study of esterification of lactic acid with isobutanol and n-butanol catalyzed by ion-exchange resins. Chinese journal of chemical engineering17(5), 773-780.
[12] Calvar, N., Gonzalez, B., Dominguez, A. (2007). Esterification of acetic acid with ethanol: Reaction kinetics and operation in a packed bed reactive distillation column. Chemical engineering and processing: Process Intensification, 46(12), 1317-1323.
[13] Assabumrungrat, S., Phongpatthanapanich, J., Praserthdam, P., Tagawa, T., Goto, S. (2003). Theoretical study on the synthesis of methyl acetate from methanol and acetic acid in pervaporation membrane reactors: effect of continuous-flow modes. Chemical engineering journal95(1), 57-65.
[14] Aage, F., Petter, R. (1977). Vapour-liquid equlibria using UNIFAC a Group-contribution method.
[15] Domingues, L., Recasens, F., Larrayoz, M. (1999). Studies of a pervaporation reactor: kinetics and equilibrium shift in benzyl alcohol acetylation. Chemical engineering science54(10), 1461-1465.