Optimization and kinetic evaluation of acid blue 193 degradation by UV/peroxydisulfate oxidation using response surface methodology

Document Type : Research Paper

Authors

1 Razi nuiversity

2 razi university

Abstract

The optimization of process conditions for the degradation of Acid Blue 193 by UV/peroxydisulfate was investigated using response surface methodology (RSM). The effects of four parameters namely initial K2S2O8 concentration, UV irradiation, temperature, and initial dye concentration on two process responses, color removal and the rate constants of the first-order kinetic equations, were investigated using a second-order polynomial multiple regression model. The analysis of variance (ANOVA) explained a high determination coefficient (R2) value of 0.927-0.967, which ensures a good fit of the first-order regression model with the experimental data. The central composite design (CCD) was used to optimize the process conditions, which showed that an initial K2S2O8 concentration of 5 mM, UV irradiation of 250 W, temperature of 50 °C, and the initial dye concentration of 40 mg/L were the best conditions. Under optimum conditions, the maximum color removal from the wastewater and the rate constants of the first-order kinetic equation were 100% and 0.086 min--1, respectively.

Keywords

References

[1] Zollinger, H., (1991). Colour chemistry: Synthesis properties and application of organic dyes and pigments. New York VCH publishers.
[2] Fongsatitkul, P., Elefsiniotis, P., Boonyanitchakul, B. (2006). Treatment of a textile dye wastewater by an electrochemical process. Journal of environmental science and health part A, 41(7), 1183-1195.
[3] Işık, M., Sponza, D. T. (2008). Anaerobic/aerobic treatment of a simulated textile wastewater. Separation and purification technology, 60(1), 64-72.
[4] Pandey, B. V., & Upadhyay, R. S. (2006). Spectroscopic characterization and identification of pseudomonas fluorescens mediated metabolic products of Acid Yellow-9. Microbiological research, 161(4), 311-315.
[5] Ranjusha, V. P., Pundir, R., Kumar, K., Dastidar, M. G., Sreekrishnan, T. R. (2010). Biosorption of remazol Black B dye (Azo dye) by the growing Aspergillus flavus. Journal of environmental science and health Part A, 45(10), 1256-1263.
[6] Özacar, M., Şengil, I. A. (2003). Adsorption of reactive dyes on calcined alunite from aqueous solutions. Journal of hazardous materials, 98(1), 211-224.
[7] Akkaya, G., Uzun, İ., Güzel, F. (2007). Kinetics of the adsorption of reactive dyes by chitin. Dyes and pigments, 73(2), 168-177.
[8] Benkli, Y. E., Can, M. F., Turan, M., Celik, M. S. (2005). Modification of organo-zeolite surface for the removal of reactive azo dyes in fixed-bed reactors. Water research, 39(2), 487-493.
[9] Geethakarthi, A., & Phanikumar, B. R. (2011). Adsorption of reactive dyes from aqueous solutions by tannery sludge developed activated carbon: Kinetic and equilibrium studies. International journal of environmental science & technology, 8(3), 561-570.
[10] Lin, S. H., Liu, W. Y. (1994). Treatment of textile wastewater by ozonation in a packed‐bed reactor. Environmental technology, 15(4), 299-311.
[11] Kashefialasl, M., Khosravi, M., Marandi, R., Seyyedi, K. (2006). Treatment of dye solution containing colored index acid yellow 36 by electrocoagulation using iron electrodes. International journal of environmental science and technology, 2(4), 365-371.
[12] Daneshvar, N., Sorkhabi, H. A., Kasiri, M. B. (2004). Decolorization of dye solution containing Acid Red 14 by electrocoagulation with a comparative investigation of different electrode connections. Journal of hazardous materials, 112(1), 55-62.
[13] Metcalf & Eddy (Empresa comercial). (1991). Wastewater Engineering: Treatment disposal and reuse. Irwin Mcgraw Hill.
[14] Ternes, T. A., Hirsch, R. (2000). Occurrence and behavior of X-ray contrast media in sewage facilities and the aquatic environment. Environmental science & technology, 34(13), 2741-2748.
[15] Xu, X. R., Li, X. Z. (2010). Degradation of azo dye Orange G in aqueous solutions by persulfate with ferrous ion. Separation and purification technology, 72(1), 105-111.
[16] Rastogi, A., Al-Abed, S. R., Dionysiou, D. D. (2009). Sulfate radical-based ferrous–peroxymonosulfate oxidative system for PCBs degradation in aqueous and sediment systems. Applied catalysis B: environmental, 85(3), 171-179.
[17] Wang, P., Yang, S., Shan, L., Niu, R., Shao, X. (2011). Involvements of chloride ion in decolorization of Acid Orange 7 by activated peroxydisulfate or peroxymonosulfate oxidation. Journal of environmental sciences, 23(11), 1799-1807. 
[18] Khataee, A. R., Mirzajani, O. (2010). UV/peroxydisulfate oxidation of CI Basic Blue 3: Modeling of key factors by artificial neural network. Desalination, 251(1), 64-69.
[19] Salari, D., Niaei, A., Aber, S., Rasoulifard, M. H. (2009). The photooxidative destruction of CI Basic Yellow 2 using UV/S2O82– process in a rectangular continuous photoreactor. Journal of hazardous materials, 166(1), 61-66.
[20] Zhang, H., Zhang, J., Zhang, C., Liu, F., Zhang, D. (2009). Degradation of CI acid 0range 7 by the advanced Fenton process in combination with ultrasonic irradiation. Ultrasonics sonochemistry, 16(3), 325-330.
[21] Panizza, M., Cerisola, G. (2009). Electro-Fenton degradation of synthetic dyes. Water research, 43(2), 339-344.
[22] Özcan, A. S., Erdem, B., Özcan, A. (2004). Adsorption of Acid Blue 193 from aqueous solutions onto Na–bentonite and DTMA–bentonite. Journal of colloid and Interface science, 280(1), 44-54.
[23] Özcan, A., Öncü, E. M., Özcan, A. S. (2006). Kinetics, isotherm and thermodynamic studies of adsorption of Acid blue 193 from aqueous solutions onto natural sepiolite. Colloids and surfaces A: Physicochemical and engineering aspects, 277(1), 90-97.
[24] Can, M. (2015). Investigation of the factors affecting acid blue 256 adsorption from aqueous solutions onto red pine sawdust: equilibrium, kinetics, process design, and spectroscopic analysis. Desalination and water treatment, (DOI: 10.1080/19443994.2014.1003974).
[25] Vijaykumar, M. H., Veeranagouda, Y., Neelakanteshwar, K., Karegoudar, T. B. (2006). Decolorization of 1: 2 metal complex dye Acid blue 193 by a newly isolated fungus, Cladosporium cladosporioides. World journal of microbiology and biotechnology, 22(2), 157-162.
[26] Purai, A., & Rattan, V. K. (2012). Biosorption of leather Dye (Acid Blue 193) from aqueous solution using ash prepared from cow dung, mango stone, parthenium leaves and activated carbon. Indian chemical engineer, 54(3), 190-209.
[27] Rasoulifard, M. H., Fazli, M., Inanlou, M., Ahmadi, R. (2015). Evaluation of the effectiveness of process in removal trace anthraquinone CI acid blue 25 from wastewater. Chemical engineering communications, 202(4), 467-474.
[28] Shu, H. Y., Chang, M. C., Huang, S. W. (2015). UV irradiation catalyzed persulfate advanced oxidation process for decolorization of Acid Blue 113 wastewater. Desalination and water treatment, 54(4-5), 1013-1021.
[29] Shu, H. Y., Chang, M. C., Huang, S. W. (2015). Decolorization and mineralization of azo dye Acid Blue 113 by the UV/Oxone process and optimization of operating parameters. Desalination and Water Treatment, (DOI: 10.1080/ 19443994.2015.1031188).
[30] Akay, U., Demirtas, E. A. (2015). Degradation of burazol blue ED by heterogeneous fenton process: simultaneous optimization by central composite design. Desalination and water treatment, 56(12), 3346-3356.
[31] House, D. A. (1962). Kinetics and mechanism of oxidations by peroxydisulfate. Chemical reviews, 62(3), 185-203.
[32] Maurino, V., Calza, P., Minero, C., Pelizzetti, E., Vincenti, M. (1997). Light-assisted 1, 4-dioxane degradation. Chemosphere, 35(11), 2675-2688.
[33] Weiner, E. R. (2000). A Dictionary of inorganic water quality parameters and pollutants. Applications of environmental chemistry, A practical guide for environmental professionals, 27.
[34] Lapin, L. L. (1997). Modern engineering statistics. Duxbury.
[35] Vining, G. G., Kowalski, S. (2010). Statistical methods for engineers. Cengage Learning.
[36] Modirshahla, N., Behnajady, M. A., Ghanbary, F. (2007). Decolorization and mineralization of CI Acid Yellow 23 by Fenton and photo-Fenton processes. Dyes and pigments, 73(3), 305-310.
[37] Chan, T. W., Graham, N. J., Chu, W. (2010). Degradation of iopromide by combined UV irradiation and peroxydisulfate. Journal of hazardous materials, 181(1), 508-513.
[38] Oh, S. Y., Kim, H. W., Park, J. M., Park, H. S., Yoon, C. (2009). Oxidation of polyvinyl alcohol by persulfate activated with heat, Fe 2+, and zero-valent iron. Journal of hazardous materials, 168(1), 346-351.
[39] Sun, S. P., Li, C. J., Sun, J. H., Shi, S. H., Fan, M. H., Zhou, Q. (2009). Decolorization of an azo dye Orange G in aqueous solution by Fenton oxidation process: Effect of system parameters and kinetic study. Journal of hazardous materials, 161(2), 1052-1057.
[40] Lau, T. K., Chu, W., Graham, N. J. (2007). The aqueous degradation of butylated hydroxyanisole by UV/S2O82-: study of reaction mechanisms via dimerization and mineralization. Environmental science & technology, 41(2), 613-619.
[41] Kasiri, M. B., Khataee, A. R. (2011). Photooxidative decolorization of two organic dyes with different chemical structures by UV/H 2 O 2 process: experimental design. Desalination, 270(1), 151-159.
[42] Sun, S. P., Li, C. J., Sun, J. H., Shi, S. H., Fan, M. H., Zhou, Q. (2009). Decolorization of an azo dye Orange G in aqueous solution by Fenton oxidation process: Effect of system parameters and kinetic study. Journal of hazardous materials, 161(2), 1052-1057.

Files

Cited by

History

  • Receive Date: 30 November 1999
  • Accept Date: 30 November 1999

Share

How to cite

Statistics